TL10

Refined and capable, the TL10 is a great all-around performer. It features excellent weight distribution making it ideally suited for a wide range of tasks on the jobsite.


Performance Durability
• Turbocharged Engine • Oversized Pins and Bushings
• EPA Interim Tier 4 Engine w/ DOC+DPF • Heavy Duty Lift Cylinders w/ Cushion
• Double Reduction Planetary Drives • Welded Frame w/ Multiple Cross Members
• Available High Flow - 36 gpm • Model Specific U/C Components
   

Comfort and Convenience

Service and Uptime
• Pilot Joystick Controls • High Capacity Cooling Module
• Deluxe High Back Suspension Seat • Large Removable Belly Pans
• Overhead Cab Door • Automatic Fuel Bleed System
• Multi-Information Display • 2 Year, 2,000 Hour Warranty
   

Takeuchi Fleet Management (TFM)

• 2 Year Standard Equipment  
• Remote Diagnostics  
• Proactive Maintenance  
• Control Costs  

Click the images below to view Key

 

PerformanceDurabilityOperator ComfortServiceability

TL10   TL10   TL10

Click the links below to view Product Specifications.

 

Operating Weight - Canopy 10,318 lb (4,680 kg)
Operating Weight - Cab 10,516 lb (4,770 kg)
Tipping Load 6,867 lb (3,115 kg)
ROC (SAE J818 standard 35% tipping load*)  2,403 lb (1,090 kg)
Operating Load at 50% of Tipping Load  3,434 lb (1,558 kg)
ROC with Optional Counterweight  2,723 lb (1,235 kg)
Bucket Breakout Force 7,400 lb (3,357 kg)
Lift Arm Breakout Force 7,425 lb (3,368 kg)
Traction Force 11,067 lb (5,020 kg)
Bucket Capacity (SAE Heaped) 20.3 cu ft (0.59 m3)
 
Cycle Time
Raise - Full Load  4.6 seconds
Lower - No Load  3.0 second)
Dump - Full Load  3.0 seconds
Curl - No Load  2.0 seconds
*Operating Capacity of track loaders to be rated according to SAE J818 at no more than 35% of the tipping load
Make/Model
Kubota / V3800CRT
Tier Rating  EPA Interim Tier 4
Cylinders/Displacement  4/230 cu in (3.8 L)
Horsepower  92.0 hp (68.6 Kw)
Rated / Max Engine Speed  2,400 rpm / 2,600 rpm
Maximum Torque  247 ft-lb @ 1,500 rpm (335 Nm)
Engine Lubrication   13.9 qt (13.2 L)
Cooling system  16.4 qt (15.5 L)
Fuel Tank Capacity   23.8 gal (90 L)
Fuel Consumption (65% of full load)   3.3 gal/hr (12.7 L/hr)
Electrical System  12 volts / 80 amps
Traction Drive Type
Hydrostatic drive with double reduction planetary final drive
Parking Brake  Spring applied, hydraulically released
Track Roller Type  Permanently sealed rollers with precision metal face seals
Track Rollers  5 per side
Tracking Width  17.7 in (450 mm)
Track Ground Contact Length  4 ft 10.9 in (1,495 mm)
Ground Pressure - Canopy 4.4 psi (30.1 kPa)
Ground Pressure - Cab 4.5 psi (30.7 kPa)
 
Maximum Travel Speed
Low Range 4.6 mph (7.4 km/hr)
High Range 7.2 mph (11.6 km/hr)
Hydraulic Reservoir Capacity
12.7 gal (48 L)
Hydraulic System Capacity
19.5 gal (74 L)
Auxiliary Hydraulic Flow  20 gal/min (75 L/min)
Auxiliary Hydraulic Flow - Optional High Flow   36 gal/min (137 L/min)
Auxiliary Hydraulic Flow - Optional 2nd Circuit   17 gal/min (64.5 L/min)
Auxiliary Hydraulic Pressure  3,046 psi (21 MPa)
Front Clearance Radius with Bucket  4 ft 11.1 in (1,500 mm)
Rear Clearance Radius  5 ft 6.3 in (1,683 mm)
Angle of Departure  30 degrees
Maximum Lift Height to Bucket Pin  10 ft 2.9 in (3,122 mm)
Dump Height Fully Raised  7 ft 10.8 in (2,407 mm)
Maximum Dump Angle Fully Raised  38.5 degrees
Maximum Bucket Rollback at Ground Level  31 degrees
Reach Fully Raised  2 ft 10.4 in (875 mm)
Overall Width Without Bucket  5 ft 9.7 in (1,770 mm)
Recommended Bucket Width  76 in (1,930 mm)
Overall Height  7 ft 5.4 in (2,270 mm)
Overall Length With Bucket  9 ft 9.7 in (1,770 mm)
Minimum Ground Clearance  12.8 in (325 mm)
ENGINE
  • EPA Interim Tier 4 compliant
  • Turbocharged engine
  • Automatic fuel-bleed system
  • Extended life coolant
  • Dual element air filter with pre-cleaner
ELECTRICAL
  • Electronic engine monitoring system
  • Fuel and coolant temperature gauge
  • 12 volt system with 80 amp alternator
  • Halogen worklights, front and rear
  • Engine preheat
  • Hour meter
  • Back-up alarm
UNDERCARRIAGE and FRAME
  • Permanently sealed track rollers with metal face seals
  • Welded track frame with multiple cross members
  • 2-Speed travel
  • 17.7” Rubber track with integrated steel cables and forged steel inserts
  • Grease type track adjuster
HYDRAULIC
  • Cushioned boom cylinders
  • Boom float with detent
  • Pilot proportional hydraulic controls
  • Pressure relieving flat faced coupler body
  • 14-pin connector with push button control
  • Hydraulic self leveling
  • Available high flow auxiliary hydraulics, 36 gpm
  • Available 2nd auxiliary circuit, 17 gpm
  • Available ride control
  • Available control pattern change valve
WORKING EQUIPMENT
  • Radial boom design
  • Mechanical quick coupler
  • Available Hydraulic quick coupler
  • Available 76" HD smooth lip dirt bucket (20.3 cu ft)
  • Available 76" HD dirt bucket with (8) teeth (20.3 cu ft)
  • Available 7' Six way dozer blade
  • Available HD 48" pallet forks and frame
  • Available Counterweight kit (575 lbs)
OPERATOR'S STATION
  • Tilt-up operator station
  • Pilot operated controls
  • Six-way adjustable suspension seat
  • Rear pivoting seat bar with integrated arm rests
  • Retractable seat belt
  • ROPS / FOPS structure
  • Available pressurized cab with roll-up door, air conditioning, heat, defrost, and wiper
  • Available 3" seat belt
  • Available 3 point seat belt
  • Available AM / FM / Mp3 radio with NOAA weatherband
TAKEUCHI FLEET MANAGEMENT (TFM)
  • Minimize Downtime
  • Remote Diagnostics
  • Utilization Tracking
  • Proactive Maintenance
  • Control Costs