TS70R

The TS70R is a large frame skid steer with a radial lift loader that is built for the most demanding applications. The pilot operated joysticks provide greater control and the turbocharged engine delivers the power and performance required for those tough jobs.


Performance Durability
• Turbocharged Engine • Radial Lift Loader Design
• Powerful Traction Force • Heavy Duty Axle Pods
• Angle of Departure/Ground Clearance • Standard Metal Faced Axle Seals
• High Capacity Fuel Tank • All Welded Frame
   

Comfort and Convenience

Service and Uptime
• Pilot Joystick Controls • Swing Out Rear Door and Radiator
• Heads-Up Gauges • Dual Element Air Cleaner
• Visibility • Automatic Fuel Bleed System
• Optional Pressurized Cab • 2 Year, 2,000 Hour Warranty

Click the images below to view Key Features

 

PerformanceDurabilityOperator ComfortServiceability

TS70R   TS70R   TS70R

Click the links below to view Product Specifications.

 

Loader Type Radial
Operating Weight 7,450 lbs (3,379 kg)
Tipping Load 3,987 lbs (1,808 kg)
Rated Operating Capacity  2,000 lbs    (907 kg)
Bucket Breakout Force 5,500 lbs (2,494 kg)
Lift Arm Breakout Force 7,000 lbs (3,175 kg)
Traction Force 8,700 lbs (3,946 kg)
Make/Model
Perkins / 804D-33T Turbocharged
Tier Rating EPA Interim Tier 4
Cylinders/Displacement  4 / 201 in³ (3.3 L)
Horsepower Gross  74 hp (55 kW)
Rated Engine Speed  2,500 rpm
Maximum Torque  180 ft-lb (245 Nm)
Engine Lubrication   9.0 qts (8.5 L)
Cooling system  12.0 qts (11.0 L)
Fuel Tank Capacity   30.0 gal (113.0 L)
Electrical System  12 volts / 90 amps
Traction Drive Type
Hydrostatic
Chain Case  Bow Tie Drive System
Chain Size  100 ANSI
Wheel Size  12 x 16.5
Width Over Tires  72 in (1,829 mm)
 
Maximum Travel Speed
Single 8.5 mph (13.6 km / hr)
Optional Two Speed 12.0 mph (19.3 km / hr)
Hydraulic Reservoir Capacity
10.0 gal (38.0 L)
Auxiliary Hydraulic Flow  21.5 gal/min (81.0 L / min)
Hydraulic System Pressure   3,335 psi (22.9 MPa)
Maximum Lift Height to Bucket Pin  10 ft 5 in (3,175 mm)
Dump Height Fully Raised  8 ft 5 in (2,570 mm)
Dump Reach Fully Raised  2 ft 1.2 in (640 mm)
Maximum Bucket Rollback at Ground  30°
Maximum Dump Angle Fully Raised  34°
Transport Length  11 ft 11.7 in (3,652 mm)
Machine Length  9 ft 1.5 in (2,782 mm)
Wheel Base  4 ft 0 in (1,242 mm)
Angle of Departure  25.4°
Ground Clearance  10.5 in (267 mm)
Overall Width - Wide Position  6 ft 0 in (1,828 mm)
Overall Width - Wheel Reversed  5 ft 6 in (1,676 mm)
Overall Height  7 ft 0 in (2,134 mm)
ENGINE
  • EPA Interim Tier 4 compliant
  • Turbocharged
  • Engine Driven Fan
  • Swing-out cooling module
  • Dual Element Air Filter
  • Available engine block heater
ELECTRICAL
  • Machine Monitoring System w/ Tachometer, Fuel and Coolant Temperature Gauges
  • 12 volt system with 90 amp alternator
  • Halogen work lights, front and rear
  • Hour meter
  • Back-up alarm
DRIVE TRAIN and FRAME
  • Mechanical faced axle seals
  • Hydrostatic drive system
  • 100 ANSI chain
  • Offset wheels are reversible for narrow or wide stance
  • Heavy duty tires
  • Available Over the Tire Tracks (OTT)
  • Available Two-Speed Travel
HYDRAULIC
  • Boom float with detent
  • Pilot proportional hydraulic controls
  • Pressure relieving flat faced coupler body
  • Auxiliary hydraulic flow of 21.5 gal / min (81.0 L / min)
WORKING EQUIPMENT
  • Radial boom design
  • Mechanical quick coupler
  • Available Hydraulic quick coupler
  • Available 67” Smooth Lip Bucket (16.2 cu ft) (Narrow Wheel Position)
  • Available 72” Smooth Lip Bucket with Bolt-on Cutting Edge (17.8 cu ft)
  • Available attachment control kit with 8 pin connector
  • Available bolt-on tooth bar
  • Available 42” pallet forks
OPERATOR'S STATION
  • Tilt-up operator station
  • Pilot operated joystick controls
  • Rear pivoting seat bar with integrated arm rests
  • ROPS / FOPS structure
  • 12 volt power outlet
  • Available deluxe suspension seat
  • Available pressurized cab with heat
  • Available pressurized cab with air conditioner and heat
  • Available AM / FM / MP3 radio with NOAA weather band